Specifications

Back
Accessories
Brochure
Characteristic Value
Internal Signal Processing 32-bit (Accumulator 58-bit)
Sampling Frequency Internal: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz External: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Normal rate: 44.1 kHz -10% – 48 kHz+6% Double rate: 88.2 kHz -10% – 96 kHz+6%
Signal Delay Less than 2.3ms CH INPUT to STEREO OUT (@Sampling frequency = 48 kHz) Less than 2.2ms CH INPUT to STEREO OUT (@Sampling frequency = 96 kHz)
Fader Motorized, touch sensitive: 100mm x 25
Fader Resolution 0 – -96 dB (256 steps/100mm) master faders +10 – -72 dB (256 steps/100mm) other faders 0 – -96 dB (256 steps/100mm) stereo faders
Total Harmonic Distortion Input Gain = Min.: Less than 0.05% 20Hz to 20 kHz @+14dB into 600 W Less than 0.01% 1 kHz @+18dB into 600 W CH INPUT to STEREO OUT: Less than 0.05% 20Hz to 20 kHz @+14dB into 600 W Less than 0.01% 1 kHz @+18dB into 600 W
Frequency Response 0.5,-1.5dB 20Hz – 20 kHz @+44dB onto 600 W (@Sampling frequency = 48 kHz) 0.5,-1.5dB 20Hz – 20 kHz @+44dB onto 600 W (@Sampling frequency = 48 kHz)
Dynamic Range (maximum level to noise level) 110dB typ. DA Converter (STEREO OUT) 108dB typ. AD+DA (to STEREO OUT)
Hum & Noise* Rs = 150W Input Gain = Max. Input Pad = 0dB Input Sensitivity = -60dB: -128dB Equivalent Input Noise (20Hz-20kHz) -94dB residual output noise. STEREO OUT STEREO OUT off. -94dB (98dB S/N) STEREO OUT STEREO fader at nominal level and all CH INPUT faders at minimum level. -64dB (68dB S/N) STEREO OUTPUT STEREO fader at nominal level and all CH INPUT faders at minimum level.
Maximum Voltage Gain 74dB CH INPUT (CH1-24) to STEREO OUT / OMNI (BUS) OUT 74dB CH INPUT (CH1-24) to OMNI (AUX) OUT (via pre input fader) 74dB CH INPUT (CH1-24) to CONTROL ROOM MONITOR OUT (via STEREO bus)
Crosstalk (@1 kHz) 80dB adjacent input channels (CH1-24) 80dB input to output
Power Requirements U/C 120V 300W 60Hz
Dimensions Height: 257mm Depth: 810mm (with front pads) Width: 900mm
Net Weight 40kg
Operating free-air temperature range 10-35 °C
Storage temperature range -20-60 °C
Additional Information *Hum & Noise are measured with a 6dB/octave filter @12.7 kHz; equivalent to a 20 kHz filter with infinite dB/octave attenuation. *Input Gain = Min. *Total Harmonic Distortion is measured with a 6dB/octave filter @80kHz
Library Value
Effect libraries (EFFECT1-8) Number of factory presets
Number of user libraries 		52 (EFFECT3-8: 43)
76
Compressor libraries Number of factory presets
Number of user libraries 		36
92
Gate libraries Number of factory presets
Number of user libraries 		4
124
EQ libraries Number of factory presets
Number of user libraries 		40
160
Channel libraries Number of factory presets
Number of user libraries 		2
127
GEQ libraries (EQ1-6) Number of factory presets
Number of user libraries 		1
128
Surround Monitor libraries Number of factory presets
Number of user libraries 		1
32
Input patch libraries Number of factory presets
Number of user libraries 		1
32
Output patch libraries Number of factory presets
Number of user libraries 		1
32
Bus to stereo libraries Number of factory presets
Number of user libraries 		1
32
Input Terminals GAIN Actual Load Impedance For Use With Nominal Input level Connector in
Sensitivity*1 Nominal Max. before clip
CH INPUT A/B 1-24 0 -60dB 3KΩ 50-600Ω Lines -70dB (0.245mV) -60dB (0.775mV) -46dB (3.88mV) A:XLR-3-31 type (Balanced)*2
26 -16dB
-26dB (38.8mV) -16dB (0.123V)
INSERT IN 1-24 10kΩ 600Ω Lines -6dB (388mV) +4dB (1.23V) +18dB (6.16V) Phone Jack (TRS) (Balanced)*3
2TR IN ANALOG 1(L,R) 10kΩ 600Ω Lines +4dB (1.23V) +4dB (1.23V) +18dB (6.16V) Phone Jack (TRS) (Balanced)*3
2TR IN ANALOG 2(L,R) 10kΩ 600Ω Lines -10dB (0.316V) -10dB (0.316V) +4dBV (1.58V) RCA Pin Jack (Unbalanced)
2TR IN DIGITAL 1(L,R) – – -20dBFS -20dBFS -6dB (388mV) Optical Connector (JEITA RC-5720C)
The table above represents the input terminals, gain settings, actual load impedance, use compatibility, and input levels for various input channels of the device.
Output Terminals Actual Source Impedance (Ω) For Use With Nominal (Ω) GAIN SW Output level Connector in Console
Nominal Max. before clip
Stereo Out (L,R) 600 10k Lines – -10dBV(0.316V) +4dB(1.58V) RCA Pin Jack (Unbalanced)
150 600 Lines – +4dB(1.23V) +18dB(6.16V) XLR-3-32 type (Balanced)*1
STUDIO MONITOR OUT (L,R) 150 10k Lines – +4dB(1.23V) +18dB(6.16V) Phone Jack (TRS) (Balanced)*2
C-R MONITOR OUT LARGE (L,R) 150 600 Lines – +4dB(1.23V) +18dB(6.16V) XLR-3-32 type (Balanced)*1
C-R MONITOR OUT SMALL (L,R) 150 600 Lines – +4dB(1.23V) +18dB(6.16V) XLR-3-32 type (Balanced)*1
OMNI OUT 1-8 150 10k Lines +18dB (default) +4dB(1.23V) +18dB(6.16V) Phone Jack (TRS) (Balanced)*2
+4dB -10dB(0.245V) +4dB(1.23V)
INSERT OUT 1-24 600 10k Lines – +4dB(1.23V) +18dB(6.16V) Phone Jack (TRS) (Balanced)*2
PHONES 100 8 Lines – 4mW 25mW Stereo Phone Jack (TRS) (Unbalanced)*3
40 Lines – 12mW 75mW
*1. XLR-3-32 type connectors are balanced. (1 = GND, 2 = HOT, 3 = Cold) *2. Phone jack are balanced. (Tip = HOT, Ring = COLD, Sleeve = GND) *3. PHONES stereo phone jack is unbalanced. (Tip = LEFT, Ring = RIGHT, Sleeve = GND)
  • STEREO OUT (L,R), 0dBV is referenced to 1.00 Vrms.
  • In these specifications, when dB represents are specific voltage, 0dB is referenced to 0.775 Vrms.
  • All output (except INSERT OUT 1-24) DA converters are 24 bit, 128 times oversampling.
Terminal Format Data length Level Connector in Console
2TR IN DIGITAL 1 AES/EBU 24 bit RS422 XLR-3-31 type (balanced)*2
2 AES/EBU 24 bit RS422 XLR-3-31 type (balanced)*2
3 IEC-60958 24 bit 0.5Vpp/75Ω RCA Pin Jack
CASCADE IN – – RS422 D-SUB Half Pitch Connector 68P (Female)
*1. DIGITAL IN 1-3 DE-EMPHASIS is automatically processed when input signal contains emphasis *2. XLR-3-31 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD)
DIGITAL OUTPUT CHARACTERISTICS
Terminal Format Data length Level Connector in Console
2TR IN DIGITAL 1 AES/EBU*1 Professional use 24 bit*3 RS422 XLR-3-31 type (balanced)*4
2 AES/EBU*1 Professional use 24 bit*3 RS422 XLR-3-31 type (balanced)*4
3 IEC-60958*2 Consumer use 24 bit*3 0.5Vpp/75 Ω RCA Pin Jack
CASCADE OUT – – RS422 D-SUB Half Pitch Connector 68P (Female)
*1. channel status of DIGITAL OUT 1,2
type emphasis sampling rate style=“font-size: xx-small;“>: 2 audio channels : NO : depends on the internal configuration
*2. channel status of DIGITAL OUT 3
type category code copy prohibit emphasis clock accuracy sampling rate : 2 audio channels : 2 channel PCM encoder/decoder : NO : NO : Level II (1000 ppm) : depends on internal configuration
*3. dither : word length 16 – 24 bit
*4 XLR-3-32 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD)
Maker Model Function IN OUT Format Res/Freq Connector Note
Yamaha MY8-AT Digital I/O 8 8 ADAT 20bit 44.1/48kHz Toslink x 2 Can handle 24 bit/96 kHz by double channel mode
MY8-AE Digital I/O 8 8 AES/EBU 24bit 44.1/48kHZ D-sub 25pin Can handle 24 bit/96 kHz by double channel mode
MY8-TD Digital I/O 8 8 TDIF 24bit 44.1/48kHz D-sub 25pin Can handle 24 bit/96 kHz by double channel mode
MY4-AD A to D In 4 – – 24bit 44.1/48kHZ XLR x 4
MY4-DA D to A Out – 4 – 20bit 44.1/48kHz XLR x 4
MY8-mLAN mLAN Interface 8 8 IEEE 1394 24bit 44.1/48kHZ 1394 6pin Maximum 5 Nodes
MY8-AD96 A to D In 8 – ADAT 24bit 44.1/48/88.2/96kHz D-sub 25pin
MY8-DA96 D to A Out – 8 – 24bit 44.1/48/88.2/96kHz D-sub 25pin
MY8-AE96S Digital I/O 8 8 AES/EBU 24bit 44.1/48/88.2/96kHz D-sub 25pin Sampling Rate Converter for Input, 3 cards max. with DM2000
MY8-AE96 Digital I/O 8 8 AES/EBU 24bit 44.1/48/88.2/96kHz D-sub 25pin
Third Party
Category Product Type Inputs Outputs Connectivity Resolution Interface Notes
Waves Y56K Effect & I/O 8 8 ADAT 24bit 44.1/48kHz Toslink x 2 Check instructions for multiple use
Apogee AP8AD A to D In 8 – – 24bit 44.1/48/88.2/96kHz D-sub 25pin Check instructions for multiple use
  • Specifications and appearance subject to change without notice.
  • All trademarks and registered trademarks are property of their respective owners. Pro Tools™ is a trademark of Digidesign, Avid Technology Inc. Nuendo™ is a trademark of Steinberg Media Technologies AG. Adat us a trademark of Alesis Corportion. Tascam, TDIF, MX2424 are trademarks of Teac Corporation. MDR24/96 is a trademark of Mackie Designs Inc. Macintosh is a trademark of Apple Computer Inc. Windows is a trademark of Microsoft Corporation.